Distributed in the UK by Custom Cruisers UK Ltd.

Ztechnik Accessory Mount Round Top Plate 2.25 in. Round Accessory Top Plate for mounting a device with the 4 hole AMPs pattern used by many GPS and satellite radio manufacturers.

Platform: 2.25 in. (5.7cm) Round Top Plate 6061 T6 Aluminum and Stainless Steel.

You must purchase the following to install this product: Z6003

2.25 in. Round Accessory Top Plate for mounting a device with the 4 hole AMPs pattern used by many GPS and satellite radio manufacturers.

Platform: 2.25 in. (5.7 ]cm) Round Top Plate 6061 T6 Aluminum

You must purchase the following to install this product: Z6003

Accessory Top Plate for mounting a device with the four bolt AMPS pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device securely and to isolate vibration. Works with Satellite Radio, Garmin® and Tom Tom® GPS Cradles, and RAM-Mount GPS Cradles.

Platform: 3 in. x 2.25 in. (7.6cm x 5.7cm)

You must purchase the following to install this product: Z6003 

The Double Top Plate Kit replaces the single round top plate of any current ZTechnik Accessory Mount. Mount a GPS and another device to the same Accessory Mount! Dual 3 in. x 2.25 in. plates each with the industry standard 4-hole AMPS mount pattern. Top p

The 3.0 in. Extension Shaft provides additional mounting flexibility. Positions your devices within easier reach or clears your tank bag or gauges. 3.0 in. (76mm) 6061 T6 Aluminum 

You must purchase the following to install this product: Z6003 Z6011 Z6012

The 3.0 in. Extension Shaft provides additional mounting flexibility. Positions your devices within easier reach or clears your tank bag or gauges. 3.0 in. (76mm) 6061 T6 Aluminum

You must purchase the following to install this product: Z6003 Z6011 Z6012

Provides a magnetic mounting platform for satellite radio antennas. Stainless Steel

You must purchase the following to install this product: Z6003 Z6011 Z6012 Z6014 Z6015

GPS Mount Garmin or XM radio Top Plate Ztechnik Accessory allows mounting to GPS techmounts or toher makes Ztechnik Z6054 Black  Provides a solid mounting platform for your Garmin® GXM 40 or 30 Antenna. Stainless Steel

You must purchase the following to install this product: Z6003 Z6011 Z6012 Z6014 Z6015

GPS mobile phone holder this Ztechnik Accessory allows mounting to GPS techmounts or other makes Ztechnik Z6055 Black Ztechnik Z6055 Adjustable Cradle for Cell Phones MP3 Players etc. Adjusts to accommodate devices from 1.75 to 3.25 in. wide and up to 4.0 in. tall and .75 in. thick. Mounts to any current ZTechnik Accessory Mount with included hardware. ABS Plastic

You must purchase the following to install this product: Z6003

Motorcycle GPS Sat Nav adjustable holder by Ztechnik Accessory Mount GPS Holder Z6057 Adjustable Cradle for GPS units with flat back panels. Adjusts to accommodate GPS Units from 2.5 to 3.5 in. tall 5.0 in. wide and 1.25 in. thick. Mounts to any current ZTechnik Accessory Mount with included hardware. ABS Plastic

You must purchase the following to install this product: Z6003

Converts 4-Hole AMPS pattern on ZTechnik Accessory Mount Top Plates to 4-Pin Square Holes. Allows 4- Pin Square Hole mounting accessories to be mounted onto ZTechnik top plates. ABS Plastic

You must purchase the following to install this product: Z6003 Z6

Converts 4-Pin Square Hole AMPS pattern on ZTechnik Accessory Mount Top Plates to Single Pin. Allows Single Pin mounting accessories to be mounted onto ZTechnik top plates. ABS Plastic

You must purchase the following to install this product: Z6003 Z6011 Z

Converts 4-Hole AMPS pattern on ZTechnik Accessory Mount Top Plates to 4-Pin Square Holes. Allows 4-Pin Square Hole mounting accessories to be mounted onto ZTechnik top plates. ABS Plastic

You must purchase the following to install this product: Z6003 Z60

Motorcycle Blackberry phone holder for GPS Sat Nav mount Ztechnik Accessory Mount Cradle for   Custom  with Ztechnik Z6061 Securely Holds your Blackberry  Custom . Mounts with included hardware to any ZTechnik Accessory Mount. ABS Plastic

You must purchase the following to install this product: Z6003 Z6011 Z6012 Z6014 Z6015

Motorcycle Blackberry phone holder for GPS Sat Nav mount Ztechnik Accessory Mount Cradle for   Custom  with Ztechnik Z6064 Securely Holds your Blackberry® Pearl®. Mounts with included hardware to any ZTechnik Accessory Mount. ABS Plastic

You must purchase the following to install this product: Z6003 Z6011 Z6012 Z6014 Z6015

Motorcycle Blackberry Bold phone holder for GPS Sat Nav mount Ztechnik Accessory Mount Cradle for   Custom  with Ztechnik Z6061  Securely Holds your Blackberry  Bold . Mounts with included hardware to any ZTechnik Accessory Mount.

You must purchase the following to install this product: Z6003

ABS Plastic 

Motorcycle Blackberry Bold phone holder for GPS Sat Nav mount Ztechnik Accessory Mount Cradle for   Custom  with Ztechnik Z6061 ZTechnik Accessory Mount  Cradle for Blackberry Storm part number Z6066Securely Holds your Blackberry® Storm. Mounts with included hardware to any ZTechnik Accessory Mount.

You must purchase the following to install this product: Z6003

ABS Plastic 

Motorcycle waterproof iphone holder ZTechnik Water Resistant mobile phone  ipod Case for most sat nav mounts comes with quick reelase plate to allow easy removal from bike whilst still in case and has cable  entry at bottom Finally, an easy way to keep your mobile phone secure and dry on your motorcycle! Until now, it was almost impossible to keep your phone safe while also being clearly visible and within easy reach. The clear front cover allows you to use the touchscreen and to clearly see the screen. Multiple foam inserts adapt to phones of varying thickness. Water Resistant entry point for power and other cables.

 Holds any Mobile Phone or other device up to 3.0 in. x 4.7 in. x 1.0 in. Water Resistant entry point for power and other cables. Mounts with included Two-Pin Adaptor to any ZTechnik Round or Rectangular Top Plate.

 

 I use one they are great see our youtube video on my glide plus the cassette adaptor to allow you to play thru any radio cassette standard radio on your bike! You must purchase the following to install this product: Z6003

he ZTechnik BMW GT Center Mount fits the K1200 GT (2006-2008) and the K1300 GT (all years). Mounts to handlebar adjustor mount points, includes all necessary hardware. Full handlebar adjustability is maintained. Top Plate is fully angle adjustable and can be rotated for easy accessibility and viewing of your device. Standard Round Top Plate is great for mounting devices like a GPS or Satellite Radio.
Choose from a wide range of adapters and replacement top plates to fit our ZTechnik Accessory Mounts and your electronic devices. Click the button to see them all!

Application Notes: Larger devices such as a Radar Detector may require the Wide Top Plate, Z6045. Devices that have mounting cradles with the standard AMPS 4-hole pattern mount directly to the round top plate. Other devices will require an additional ZTechnik mounting cradle or adaptor plate. See Part Numbers Z6055-Z6066. Garmin® ZUMO® 660/665 or BMW® Navigator IV require ZTechnik Top Plate Z6033.
 

Replace the plain plastic reservoir covers with these beautifully machined aluminum replacement caps. They have a beadblasted, durable hard-anodized grey finish to match the Boxer's cylinder head covers. Precise tolerances ensure a perfect and exact fit.

Anti-rotational threads hold our ZCaps more securely than other aftermarket replacement caps, aligning and gripping the OEM reservoir's locking detents.

Complete the look with our ZTechnik Machined Aluminum ZPlugs!
 
Machined aluminum with beadblasted finish and hard-anodized grey colour. 
Includes removal/installation tool for OEM and ZTechnik reservoir covers.