Distributed in the UK by Custom Cruisers UK Ltd.

GPS Mount top plate wide fitting Ztechnik  The Z6200 Wide Accessory Top allows for the mounting of larger electronic devices, or two small devices side by side. Will work with any ZTechnik Accessory Mount product.

Accessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit.
Colour :Anodized Black 

Note: Mounts to any TechMount platform, available separately

Motorcycle GPS Mount Techmount Quick Change GPSAdaptor Plate Ztechnik Z6202 operfect for K1200GT K1300GT  Techmount Quick Change GPSAdaptor Plate Ztechnik Z6202 The TechMount Quick Change Adaptor Plate is an accessory top that makes changing from one device to another quick and easy. Simply mount your GPS or satellite radio to the Quick Change Adaptor with the supplied hardware and slide it onto any standard TechMount top plate. The adaptor is held securely with one stainless thumbscrew from underneath. Simply remove your device when its not needed and use your Adapter Plate for another device. No tools required and no need to change the top plate. Machined from a solid block of high impact ABS, this Adapter Plate is made to withstand the elements. We have pre-drilled several industry standard mounting holes into the accessory top to make mounting your device simple. It has the AMPS four hole pattern used by Garmin, Magellan, Delphi XM and Sirius. It also has the two- and four-hole patterns used for mounting almost all R.A.M. style cradles.(GPS System not included) Platform: 3.125 in. x 2.50 in. Requires Ztechnik Accessory mount ZT-Z61109 (Not Included)

 R1200GS GPS MOUNT  R1150 Accessory GPS Mount R1100 GPS Mount , but will fit most bikes with 7/8 in. handlebars. Once in place, it blends seamlessly with the OEM styling of your bike. The dual top plates swivel independently. every bike form a bandit to a fireblade! or morte exotic off roaders or ducati superbikes too!will also work as radar detector mount .see our double top top allow  2 items to be used at once!Platform: (2) 3 in. x 2.25 in.

GPS Mountable Radio cradle with single square pin Ztechnik Z6400   For mounting GPS or satellite radio cradles with a single square pin onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter. (GPS/Radio Not included)

Ztechnik GPS Mount Four-Pin Accessory Adaptor, Black  GPS Mount or Satellite radio Mount  cradles with four square holes onto a Z6202 Quick Change Adapter Plate or Z6201/6501/6601 Accessory Adapter. (GPS/Radio not included)

Satellite Radio Antenna Mount, for GPS Black this GPS MOUNT adaptor  Pre-drilled to mount onto any standard TechMount top plate or Z6202 Quick Change Adapter Plate. This bracket provides a secure and compact place to attach your XM radio antenna.(radio not Included)

GPS XM Radio Mount Garmin ® XM Antenna Mount, Black GPS XM mount Makes mounting the Garmin XM radio antenna simple. This powder coated steel bracket mounts between the GPS cradle and the Techmount top plate. (GPS/Radio Not included)

TECHMOUNT GPS top plate wide base Ztechnik Z6500 The Z6500 Wide Accessory Top allows for the mounting of larger electronic devices, or two small devices side by side. Will work with any ZTechnik Accessory Mount product.

Accessory Top Plate for mounting a device with the four bolt AMPS bolt pattern used by many GPS and SAT radio manufacturers. Uses rubber expansion nuts to hold device secure and to isolate vibration. Works with Delphi XM Roady, XM Roady II, SkyFi, SkyFi 2, Garmin GPS Cradles, and R.A.M. GPS cradles. Not for mounting any Magellan GPS with nuts built into the back of the unit. Requires ZTechnik Accessory Mount

This 22mm handlebar mount gps bracket is a universal clamp system designed for round tube, 7/8 in. diameter handlebars. The mount requires only 1/2 in. of bar space. The ball and socket design used on this mount allows a wide range of movement, making installation at complex angles possible. The top plate can be rotated 360 degrees, as well as offset left,right or centre.every bike form a bandit to a fireblade! or morte exotic off roaders or ducati superbikes too!will also work as radar detector mount .see our double top top allow  2 items to be used at once!
Platform: 3 in. x 2.25 in.

Motorcycle GPS holder  mount Ztechnik Accessory Mount Handlebar Mount (fits 7/8 to 1.25 in.) Silver Ztechnik Z6015

 This is the 3rd generation ZTechnik handlebar mounting system. Using included adaptors, fits all tubular handlebars from 7/8 in. (22mm) up to 1.25 in. (32mm). Requires only 3/4 in. of horizontal handlebar space. Standard Round Top Plate is great for mounting devices like a GPS or Satellite Radio. Top Plate is fully angle adjustable and can be rotated for easy accessibility and viewing of your device.

Application Notes: Larger devices such as a Radar Detector may require the Z6044 Wide Top Plate. Devices that have mounting cradles with the standard AMPS 4-hole pattern mount directly to the round top plate. Other devices will require an additional ZTechnik mounting cradle or adaptor plate. See Part Numbers Z6055-Z6066. Garmin® ZUMO® 660/665 or BMW® Navigator IV require ZTechnik Top Plate Z6034.

Platform: 2.25 in. (5.7cm) Round Top Plate 6061 T6 Aluminum and Stainless Steel

Motorcycle GPS holder  mount Ztechnik Accessory Mount Handlebar Mount (fits 7/8 to 1.25 in.) Black Ztechnik Z6014 Ztechnik Accessory Mount Handlebar Mount (fits 7/8 to 1.25 in.) Black This is the 3rd generation ZTechnik handlebar mounting system. Using included adaptors, fits all tubular handlebars from 7/8 in. (22mm) up to 1.25 in. (32mm). Requires only 3/4 in. of horizontal handlebar space. Standard Round Top Plate is great for mounting devices like a GPS or Satellite Radio. Top Plate is fully angle adjustable and can be rotated for easy accessibility and viewing of your device.

Application Notes: Larger devices such as a Radar Detector may require the Z6044 Wide Top Plate. Devices that have mounting cradles with the standard AMPS 4-hole pattern mount directly to the round top plate. Other devices will require an additional ZTechnik mounting cradle or adaptor plate. See Part Numbers Z6055-Z6066. Garmin® ZUMO® 660/665 or BMW® Navigator IV require ZTechnik Top Plate Z6034.

Platform: 2.25 in. (5.7cm) Round Top Plate 6061 T6 Aluminum and Stainless Steel

Motorcycle Sat Nav GPS Mount holder Ztechnik Accessory Mount Basic Handlebar Mount (fits 7/8 to 1.25 in.) Silver This is the 3rd generation ZTechnik handlebar mounting system. Using included adaptors, fits all tubular handlebars from 7/8 in. (22mm) up to 1.25 in. (32mm). Requires only 3/4 in. of horizontal handlebar space. Standard Round Top Plate is great for mounting devices like a GPS or Satellite Radio.

Application Notes: Larger devices such as a Radar Detector may require the Z6045 Wide Top Plate. Devices that have mounting cradles with the standard AMPS 4-hole pattern mount directly to the round top plate. Other devices will require an additional ZTechnik mounting cradle or adaptor plate. See Part Numbers Z6055-Z6066. Garmin® ZUMO® 660/665 or BMW® Navigator IV require ZTechnik Top Plate Z6034.

Platform: 2.25 in. (5.7cm) Round Top Plate 6061 T6 Aluminum and Stainless Steel

ZtechnikGPS Sat Nav  Mount fo motorcycles (fits 7/8 to 1.25 in.) Black This is the 3rd generation ZTechnik handlebar mounting system. Using included adaptors, fits all tubular handlebars from 7/8 in. (22mm) up to 1.25 in. (32mm). Requires only 3/4 in. of horizontal handlebar space. Standard Round Top Plate is great for mounting devices like a GPS or Satellite Radio.

Application Notes: Larger devices such as a Radar Detector may require the Z6046 Wide Top Plate. Devices that have mounting cradles with the standard AMPS 4-hole pattern mount directly to the round top plate. Other devices will require an additional ZTechnik mounting cradle or adaptor plate. See Part Numbers Z6055-Z6066. Garmin® ZUMO® 660/665 or BMW® Navigator IV require ZTechnik Top Plate Z6034.

Platform: 2.25 in. (5.7cm) Round Top Plate 6061 T6 Aluminum and Stainless Steel